T290 / Bolt Strain Sensor

T213 / Cryogenic Temperature Compensated Strain Sensor
April 26, 2021
T880
T880 / High Temperature FBG Ceramic Probe to +1000C
June 7, 2021

T290 / Bolt Strain Sensor Datasheet

Key Features

Self-temperature compensated. The T290 design consists of two precision-made FBGs written into the fibers’ core and packaged to detect strain and temperature for producing a transducer configuration of high linearity, resolution, accuracy, and precision. SLSR & BW options.

Pre-strained at the factory. Each Bolt Strain Sensor is pre-strained so that it can measure both compression and expansion forces within the fastener.

Ready to be multiplexed. Well suited for projects that include the need to monitor fastener strain and temperature at one or many locations. Provided as single-ended connectorized sensors ready to be multiplexed in a star architecture with various pigtail lengths and with a flexible number of sensors to be monitored.

Available as fully assembled Bolt Strain Sensor (standard), or as Bolt Core Insert (option, see image below). The T290-BCI “Bolt Core Insert” option allows it to be installed into the fasteners (bolts, rivets, studs, screws) by the customer with virtually no effect on the tensile strength of the respective fastener as long as the fastener OD > 12.5mm and its shank length is such that the bottom of the Insert terminates above the threads of the bolt. Low cost and field-proven. For demanding projects that require both low cost per sensing point and stable operation for long term. Suitable for hazardous environments. Field-proven since 2012.

 

Description

The T290 is a Single-Mode Fiber (SM) based Fiber Bragg Grating (FBG) embedded in a bolt, yielding a commercially packaged Bolt Strain Sensor for measuring the tension in fasteners used for joining the components of a structure in environments from -40°C to +85°C.

Integrated into a small recess bored and threaded into the center of the head and shank of a bolt, rivet, stud, screws. Available in a wide range of optical specifications. The accuracy and precision specifications take into account any hysteresis, non-linearities, and the repeatability of the sensor. The T290 sensor installation is fast, easy, intuitive. Delivers the advantages inherent to FBG sensors. Immune to lightning and electromagnetic interference (EMI). T290 series Surface Strain Sensors are fabricated using licensed and proprietary state-of-the-art laser manufacturing technologies and a patented product design. The sensor packaging described herein is the most popular configuration and can be customized.

Leave a Reply

Your email address will not be published. Required fields are marked *